Advertisement
17-56
GROUP 17-
BODY
DOORS AND WINDOWS.
when the motor and drive assembly
is
removed. Remove the motor
assembly from the regulator.
INSTALLATION
1. Install the motor on the window
regulator.
2. Position the window regulator
in
the door and engage the regulator
arm rollers in the glass channel
r.
r. (), ..
;·
1 1• I
I I
'-""'"
FIG. 20-
Relay and Wiring Installation
bracket.
3. Position the window regulator
to the door inner panel and install
the four attaching screws.
4. Install the motor bracket to
door inner panel attaching screw.
5. Insert the regulator arm roller
in the equalizer arm bracket. Position
the bracket to the inner panel and
install the two attaching screws.
6. Position the glass channel brac-
ket to the glass channel and install
the three attaching screws.
7. Connect the motor wires at the
connector.
8. Remove the window support
and check the operation of the
window mechanism.
9. Install the watershield and trim
panel on the door.
EltiSrllfb- WIKINC. Hllfii(.SS
I.
iUJ.AY ASSY.
l. WIA!NS ASSY.
~£lAY
3.
IYW,Yii AfSY.
~ELAY
I
.
CIACV/T MEAK£1. AJSY
S.
GA.OMMET
·
VIEW 8
Advertisement
