Ford FALCON XA Series Repair Manual page 208

PART 7-1 AUTOMATIC TRANSMISSION (Borg-Warner)
FIG. 23 -Selector Change Linkage- Floor Shift
EJ
CLEANING AND INSPECTION
CLEANING
TRANSMISSION
Clean aH parts with suitable sol-
vent and use moisture-free air to dry
off all parts and clean out the various
fluid passages.
The composidon dutch plates
and bands should not
be
cleaned
in
a vapor degreaser or
with
any type
of detergent soludon. To clean
these
p811s, wipe them oft' with a
lint-free cloth. New clutch plates
and bands should be soaked in trans-
mission fluid for fifteen minutes be-
fore they are assembled.
If there is reason to believe that
the converter has an excessive
amount of foreign material in it, a
service replacement unit should be
installed.
FIG. 24 - Inhibitor Switch
7-25
SEC
8