Ford FALCON XA Series Repair Manual page 248

PART 7-2- C4 AUTOMATIC TRANSMISSION
7-65
FORWARD GEAR TRAIN ASSEMBLY
FIG. 49- Forward Part of Gear
Train Positioned in Holding
Fixture
REVERSE-HIGH CLUTCH
FIG. 52 - Removing or Installing
Reverse Ring Gear Hub Retaining
Ring
7. From the g-ear train in the
holding fixture, remove the reverse-
high clutch and drum from the
forward clutch (Fig. 50).
8. If thrust washer No. 2 (Fig.
43) did not come out with the front
pump, remove the thrust washer
from the forward clutch cylinder.
FORWARD CLUTCH
HUB AND
RING GEAR
FIG. 50- Forward Part of Gear Train Disassembled
REVERSE PLANET CARRIER
REVERSE RING GEAR
AND HUB
THRUST WASHER NO . 7
LOW AND REVERSE DRUM
FIG. 51 -Lower Part of Gear Train Disassembled
[)
e
I ~
[
19
LOW-R
D1396-A
FIG. 53 - Removing or Installing
Low-Reverse Band
If a selective spacer was used. re-
move the spacer. Remove the for-
ward clutch from the forward clutch
hub and ring gear (Fig. 50).
9. If thrust washer No. 3 (Fig.
50) did not come out with the
forward clutch, remove the thrust
washer from the forward clutch hub.
10.
Remove the forward clutch
hub and ring gear from the front
planet carrier (Fig. 50).
11. Remove thrust washer No. 4
and the front planet carrier from
the input shell.
SUN GEAR
INPUT SHELL
THRUST
NO. 5
SPRING RETAINER
'""" OAC'
I
l
~-
"iJ
~<!"
ONE-WAY
CLUTCH
SPRINGS (12)
AND ROLLERS ( 1 2)
OUTER RACE