Emac Control Module Miscellaneous Interrupt Enable Register (Cmmiscinten); Emac Control Module Miscellaneous Interrupt Enable Register (Cmmiscinten) Field Descriptions - Texas Instruments TMS320DM646x User Manual

EMAC Control Module Registers
3.8

EMAC Control Module Miscellaneous Interrupt Enable Register (CMMISCINTEN)

The miscellaneous interrupt enable register (CMMISCINTEN) is shown in
Table 17.
Figure 20. EMAC Control Module Miscellaneous Interrupt Enable Register (CMMISCINTEN)
31
15
Reserved
R-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 17. EMAC Control Module Miscellaneous Interrupt Enable Register (CMMISCINTEN)
Bit Field
31-4 Reserved
3 STATPENDINTEN
2 HOSTPENDINTEN
1 LINKINTEN
0 USERINTEN
66 Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO)
Reserved
R-0
4
STATPENDINTEN
Field Descriptions
Value Description
0 Reserved
EMAC module statistics interrupt (STATPEND) enable.
0 EMAC module statistics interrupt (STATPEND) is disabled.
1 EMAC module statistics interrupt (STATPEND) is enabled.
EMAC module host error interrupt (HOSTPEND) enable.
0 EMAC module host error interrupt (HOSTPEND) is disabled.
1 EMAC module host error interrupt (HOSTPEND) is enabled.
MDIO module link change interrupt (LINKINT) enable.
0 MDIO module link change interrupt (LINKINT) is disabled.
1 MDIO module link change interrupt (LINKINT) is enabled.
MDIO module user interrupt (USERINT) enable.
0 MDIO module user interrupt (USERINT) is disabled.
1 MDIO module user interrupt (USERINT) is enabled.
Figure 20
3 2
HOSTPENDINTEN
R/W-0 R/W-0
www.ti.com
and described in
16
1 0
LINKINTEN USERINTEN
R/W-0 R/W-0
SPRUEQ6 – December 2007
Submit Documentation Feedback