Mdio User Command Complete Interrupt (Unmasked) Register (Userintraw); Mdio User Command Complete Interrupt (Unmasked) Register (Userintraw) Field Descriptions - Texas Instruments TMS320DM646x User Manual

MDIO Registers
4.7

MDIO User Command Complete Interrupt (Unmasked) Register (USERINTRAW)

The MDIO user command complete interrupt (unmasked) register (USERINTRAW) is shown in
Figure 33 and described in
Figure 33. MDIO User Command Complete Interrupt (Unmasked) Register (USERINTRAW)
31
15
LEGEND: R = Read only; R/W = Read/Write; W1C = Write 1 to clear, write of 0 has no effect; -n = value after reset
Table 31. MDIO User Command Complete Interrupt (Unmasked) Register (USERINTRAW)
Bit Field
31-2 Reserved
1-0 USERINTRAW
76 Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO)
Table 31.
Reserved
R-0
Field Descriptions
Value Description
0 Reserved
0-3h MDIO User command complete event bits. When asserted, a bit indicates that the previously
scheduled PHY read or write command using that particular USERACCESS register has
completed. USERINTRAW[0] and USERINTRAW[1] correspond to USERACCESS0 and
USERACCESS1, respectively. Writing a 1 will clear the event and writing a 0 has no effect.
0 No MDIO user command complete event.
1 The previously scheduled PHY read or write command using MDIO user access register n
(USERACCESSn) has completed.
Reserved
R-0
www.ti.com
16
2 1 0
USERINTRAW
R/W1C-0
SPRUEQ6 – December 2007
Submit Documentation Feedback