I-1-1 Indicators And Connectors - Draytek Vigor3910 Series User Manual

I - 1 - 1 I n d
I - 1 - 1 I n d
Before you use the Vigor router, please get acquainted with the LED indicators and
connectors first.
LED
PWR
ACT
USB
SFP+
P3~P12
LED on Connector
DMZ
LAN
WAN1~
WAN4
Vigor3910 Series User's Guide
i c a t o r s a n d C o n n
i c a t o r s a n d C o n n
Status
On
Off
Blinking
Off
On
Off
On
Blinking
Off
On (Left)
Off (Left)
Blinking (L)
On (Right)
Off (Right)
Left On
LED
Off
(Green)
Blinking
Right On
LED
Off
(Green)
Left On
LED
Off
Blinking
Right On
LED
Off
Left On
LED
Off
Blinking
Right On
LED
Off
e c t o r s
e c t o r s
Explanation
The router is powered on.
The router is powered off.
The system is active.
The system is hanged.
The USB device is installed and ready.
No USB device is installed.
The fiber connection is established.
The data is transmitting.
No fiber connection is established or the system is
hanged.
The Ethernet link is established on corresponding port.
No Ethernet link is established.
The data is transmitting.
The Ethernet link is established on corresponding port
with 1G Mbps or above.
The Ethernet link is established on corresponding port
with less than 1G Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
3