Draytek Vigor3910 Series User Manual page 98

Source IP
Local IP Address
To add or edit port settings, click one index number on the page. The index entry setup page
will pop up. In each index entry, you can specify 10 port ranges for diverse services.
Available settings are explained as follows:
Item
Enable Open Ports
Comment
WAN Interface
WAN IP
Source IP
Private IP
Protocol
Start Port
End Port
88
Display the source IP address.
Display the private IP address of the local host offering the
service.
Description
Check to enable this entry.
Make a name for the defined network application/service.
Specify the WAN interface that will be used for this entry.
Specify the WAN IP address that will be used for this entry.
This setting is available when WAN IP Alias is configured.
Use the drop down list to specify an IP object. Or click IP
Object link to create a new one for applying.
Enter the private IP address of the local host or click Choose
PC to select one.
Choose IP - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of
the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP,
or ----- (none) for selection.
Specify the starting port number of the service offered by
the local host.
Specify the ending port number of the service offered by the
local host.
Vigor3910 Series User's Guide