Draytek Vigor3910 Series User Manual page 101

Available settings are explained as follows:
Item
Enable
Service
Comment
Source IP
Triggering Protocol
Triggering Port
Incoming Protocol
Incoming Port
After finishing all the settings here, please click OK to save the configuration.
Vigor3910 Series User's Guide
Description
Check to enable this entry.
Choose the predefined service to apply for such trigger
profile.
Type the text to memorize the application of this rule.
Select any IP address, IP object or IP group as the source IP.
Select the protocol (TCP, UDP or TCP/UDP) for such
triggering profile.
Type the port or port range for such triggering profile.
When the triggering packets received, it is expected the
incoming packets will use the selected protocol. Select the
protocol (TCP, UDP or TCP/UDP) for the incoming data of
such triggering profile.
Type the port or port range for the incoming packets.
91