Draytek Vigor3910 Series User Manual page 106

Auto-Update
interval
Index
Enable
WAN Interface
Domain Name
3. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered
hostname: hostname and domain name suffix: dyndns.org in the Domain Name block.
The following two blocks should be typed your account Login Name: test and Password:
test.
If User-Defined is specified as the service provider, the web page will be changed
slightly as follows:
96
Set the time for the router to perform auto update for DDNS
service.
Click the number below Index to access into the setting page
of DDNS setup to set account(s).
Check the box to enable such account.
Display the WAN interface used.
Display the domain name that you set on the setting page of
DDNS setup.
Vigor3910 Series User's Guide