Ii-2-2 Internet Access - Draytek Vigor3910 Series User Manual

I I - 2 - 2 I n
I I - 2 - 2 I n
For the router supports multi-WAN function, the users can set different WAN settings for
Internet Access. Due to different Physical Mode for WAN interface, the Access Mode for these
connections also varies. Refer to the following figures.
Available settings are explained as follows:
Item
Index
Display Name
Physical Mode / Port
Access Mode
Details Page
IPv6
DHCP Client Option
38
t e r n e t A c c e s s
t e r n e t A c c e s s
Description
Display the WAN interface.
It shows the name of the WAN1 ~ WAN8 that entered in
general setup.
It shows the physical connection for WAN(Ethernet) /port
number according to the real network connection.
Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
Details Page for accessing the page to configure the settings.
This button will open different web page (based on IPv4)
according to the access mode that you choose in WAN
interface.
Note that Details Page will be changed slightly based on
physical mode.
This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN interface.
If IPv6 service is active on this WAN interface, the color of
"IPv6" will become green.
This button allows you to configure DHCP client options.
DHCP packets can be processed by adding option number and
data information when such function is enabled and
configured.
Vigor3910 Series User's Guide