Enable
Profile
Domain Name
Forwarding
DNS Server
You can set up to 120 LAN DNS profiles.
To create a LAN DNS profile:
1.
Click any index, say Index No. 1.
2.
The detailed settings with index 1 are shown below.
Available settings are explained as follows:
Item
Enable
Profile
Domain Name
CNAME (Alias Domain
Name)
IP Address List
Vigor3910 Series User's Guide
Check the box to enable the selected profile.
Display the name of the LAN DNS profile.
Display the domain name of the LAN DNS profile.
Display that such profile is conditional DNS forwarding or
not.
Display the IP addres of the DNS Server.
Description
Check this box to enable such profile.
Type a name for such profile.
Note: If you type a name here for LAN DNS and click OK to
save the configuration, the name also will be applied to
conditional DNS forwarding automatically.
Type the domain name for such profile.
CNAME is abbreviation of Canonical name record.
Such option is used to record the domain name or the host
alias.
Add – Click it to add a new host with specified reference.
Delete – Click it to remove the setting.
The IP address listed here will be used for mapping with the
domain name specified above. In general, one domain name
101