Draytek Vigor3910 Series User Manual page 151

Available settings are explained as follows:
Item
Index
Enable
Protocol
Interface
Priority
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
Move UP/Move Down
Wizard Mode
Advance Mode
To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
2. Click Index 1. The setting page will appear as follows:
Vigor3910 Series User's Guide
Description
Click the number of index to access into the configuration
web page.
Check this box to enable this policy.
Display the protocol used for this policy.
Display the interface to send packets to once the policy is
matched.
Display the priority value for such route policy profile.
Display the IP address for the start of the source IP.
Display the IP address for the end of the source IP.
Display the IP address for the start of the destination IP.
Display the IP address for the end of the destination IP.
Display the IP address for the start of the destination port.
Display the IP address for the end of the destination port.
Use Up or Down link to move the order of the policy.
Allow to configure frequently used (simple and basic)
settings of route policy via three setting pages.
Allow to configure detailed settings of route policy.
III-141