Draytek Vigor3910 Series User Manual page 412

To set a new profile, please do the steps listed below:
1. Click the Mail Server tab, and click the number (e.g., #1) under Index column for
configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item
Profile Name
SMTP Server
SMTP Port
Sender Address
Use SSL
Authentication
Sending Interval
402
Description
Type a name for such mail service profile. The maximum
length of the name you can set is 31 characters.
Type the IP address of the mail server.
Type the port number for SMTP server.
Type the e-mail address of the sender.
Check this box to use port 465 for SMTP server for some
e-mail server uses https as the transmission method.
The mail server must be authenticated with the correct
username and password to have the right of sending message
out. Check the box to enable the function.
Username – Type a name for authentication. The maximum
length of the name you can set is 31 characters.
Password – Type a password for authentication. The
maximum length of the password you can set is 31
characters.
Define the interval for the system to send the SMS out.
Vigor3910 Series User's Guide