Draytek Vigor3910 Series User Manual page 558

-l [Use SSL]
-m [SMTP Port]
-a [Sender Address]
-t Authentication
-u Username
-p Password
-i Sending Interval
E x a m p l
E x a m p
> object mail obj 1 –n buyer
> object mail obj 1 -n buyer
> object mail obj 1 -s 192.168.1.98
> object mail obj 1 -m 25
> object mail obj 1 -t 1
> object mail obj 1 -u john
> object mail obj 1 -p happy123456
> object mail obj 1 -i 25
> object mail obj 1 -v
Profile Index: 1
Profile Name:[buyer]
SMTP Server:[192.168.1.98]
SMTP Port:[25]
Sender Address:[]
Use SSL:[disable]
Authentication:[enable]
Username:[john]
Password:[******]
Sending Interval:[25(seconds)]
T e l n e t C o m m
T e l n e t C o m m
This command is used to create notification object profile.
S y n t a x
S y n t a x
object noti show
object noti setdefault
object noti obj INDEX -v
object noti obj INDEX -n Profile Name
object mail obj INDEX –e Category Status
object mail obj INDEX –d Category Status
S y n t a x
S y n t a x
Parameter
show
548
It means to use port 465 for SMTP server for some e-mail server uses
https as the transmission method.
0 – disable
1 – enable to use the port number.
It means to set the port number for SMTP server.
It means to set the e-mail address (e.g., johnwash@abc.com.tw) of
the sender.
The mail server must be authenticated with the correct username
and password to have the right of sending message out.
0 – disable
1 – enable to use the port number.
Type a name for authentication. The maximum length of the name
you can set is 31 characters.
Type a password for authentication. The maximum length of the
password you can set is 31 characters.
Define the interval for the system to send the SMS out. The unit is
second.
e
l e
a n d : o b j e c t n o t i
a n d : o b j e c t n o t i
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to show the contents for all of the profiles.
Vigor3910 Series User's Guide