Draytek Vigor3910 Series User Manual page 518

Setting saved.
> ipf set -d 2 #set data filter start from set 2
Setting saved.
> ipf set -v
Call Filter: Enable (Start Filter Set = 1)
Data Filter: Enable (Start Filter Set = 2)
Log Flag
Actions for packet not matching any rule:
Pass or Block
CodePage
Max Sessions Limit: 60000
Current Sessions : 0
Mac Bind IP
QOS Class
APP Enforcement
URL Content Filter: None
Load-Balance policy : Auto-select
--------------------------------------------------------------
CodePage
Window size
Session timeout
DrayTek Banner
---------------------------------------------------------------
Apply IP filter to VPN incoming packets
Accept large incoming fragmented UDP or ICMP packets: Enable
----------------------------------------------------------------
Strict Security Checking
[ ]APP Enforcement
>
T e l n e t C o m m
T e l n e t C o m m
This command is used to set filter rule for firewall.
S y n t a x
S y n t a x
ipf rule s r [-<command> <parameter> | ...
ipf rule s r -v
S y n t a x
S y n t a x
Parameter
s
r
[<command><parameter>|...
]
-e
508
: None
: Pass
: ANSI(1252)-Latin I
: Non-Strict
: None
: None
a n d : i p f r u l e
a n d : i p f r u l e
D e s c r i p t i o n
D e s c r i p t i o n
Description
Such word means Filter Set, range form 1~12.
Such word means Filter Rule, range from 1~7.
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
It means to enable or disable the rule setting.
0- disable
1- enable
: ANSI(1252)-Latin I
: 65535
: 1440
: Enable
: Enable
Vigor3910 Series User's Guide