Draytek Vigor3910 Series User Manual page 87

ARP Table
Select All
Sort
Refresh
Add / Update to IP Bind
List
Add
Update
Delete
IP Bind List
Backup IP Bind List
Vigor3910 Series User's Guide
not listed in IP Bind List.
LAN clients will be assigned IP addresses according to the
MAC-to-IP address associations on this page. LAN client
whose MAC address has not been bound to an IP address will
be denied network access.
Note: Before selecting Strict Bind, make sure at least one
valid MAC address has been bound to an IP address.
Otherwise no LAN clients will have network access, and it
will not be possible to connect to the router to make changes
to its configuration.
Apply Strict Bind to Subnet – Choose the subnet(s) for
applying the rules of Bind IP to MAC.
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can be
selected and added to IP Bind List by clicking Add below.
Select all entries in the ARP Table for manipulation.
Reorder the entry based on the IP address.
Refresh the ARP table listed below to obtain the newest ARP
table information.
IP Address – Type the IP address to be associated with a
MAC address.
Mac Address – Type the MAC address of the LAN client's
network interface.
Comment – Type a brief description for the entry.
It allows you to add the one you choose from the ARP table or
the IP/MAC address typed in Add and Edit to the table of IP
Bind List.
It allows you to edit and modify the selected IP address and
MAC address that you create before.
You can remove any item listed in IP Bind List. Simply click
and select the one, and click Delete. The selected item will
be removed from the IP Bind List.
It displays a list for the IP bind to MAC information.
Click Backup and enter a filename to back up IP Bind List to a
file.
77