PPPoE Login Setting
After finishing all the settings here, please click OK to save the configuration.
V
-
3
-
3
U
V
-
3
-
3
U
This page allows you to bind several user profiles into one group. These groups will be used in
Firewall>>General Setup as part of filter rules.
Please click any index number link to open the following page.
324
Such user account will be used (1) by the client with the IP
address specified or (2) by the client with the MAC address
bound with the IP address, for accessing into Vigor3910 web
user interface.
PPPoE MAC Bind – Specify a MAC address which is limited and
used for such PPPoE account.
MAC Address – Type the MAC address to be bound with the IP
address set below if PPPoE MAC Bind is enabled.
DHCP From – Use the drop down list to specify LAN/DMZ
interface. The IP address for binding with the MAC address
(above) set in the selected interface will be assigned from
the IP address set in the selected interface.
Static IP Address (optional)– Type an IP address.
s
e
r
G
r
o
u
p
s
e
r
G
r
o
u
p
Enable/Disable - Click it to enable/disable the function
of PPPoE MAC Bind.
Vigor3910 Series User's Guide
Need help?
Do you have a question about the Vigor3910 Series and is the answer not in the manual?