Draytek Vigor3910 Series User Manual page 514

-e n
-E n
-b map
-f n
-R n
-s n
E E x x a a m m p p l
> ip6 lan -l 1 -w 1 -d 2001:4860:4860::8888 -o 1 -f 0 -s 2
% Set LAN1!
% Set primary WAN1!
% Set 1st DNS server 2001:4860:4860::8888
% Set Other Option Enable!
% [LAN1] support ipv6!
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
% [LAN2] setting:
% Primary WAN
% Management
% Other Option
% WAN Exten
% Subnet ID
% Static IP(0)
%
% Static IP(1)
%
% Static IP(2)
%
% Static IP(3)
%
% DNS1
504
n=1: Enable.
It means to add an extension WAN.
n: 1: WAN1, 2: WAN2, ... x: WANx.
It means to delete an extension WAN.
n: 1: WAN1 ,2: WAN2, ... x: WANx.
It means to set bit map(decimal) for extension WAN.
map:
bit 0: WAN1
bit 1: WAN2, ... bit n: WAN(n+1).
It means to disable IPv6.
n= 1: Disable IPv6,
n=0: Enable IPv6.
It means to enable /disable RIPng.
n=1: Enable RIPng,
n=0: Disable RIPng.
It means to show IPv6 LAN setting.
n=0:show all. Default is show all.
n=1: LAN1
n=2: LAN2, ... 50: LAN50,
n=51: DMZ.
l e e
: WAN1
: SLAAC
: Disable
: None
: 2
: ::/0
[ifno: 0, enable: 0]
: ::/0
[ifno: 0, enable: 0]
: ::/0
[ifno: 0, enable: 0]
: ::/0
[ifno: 0, enable: 0]
: 2001:4860:4860::8888
Vigor3910 Series User's Guide