Draytek Vigor3910 Series User Manual page 492

ip session [add/del][IP1-IP2][num][p2pnum]
S y n t a x
S y n t a x
Parameter
on
off
default [num]
Defautlp2p [num]
status
show
timer [num]
[block/unblock][IP]
add
del
IP1-IP2
num
p2pnum
E x a m p l
E x a m p
>ip session default 100
> ip session add 192.168.1.5-192.168.1.100 100 50
> ip session on
> ip session status
IP range:
192.168.1.5 - 192.168.1.100 : 100
Current ip session limit is turn on
Current default session number is 100
T e l n e t C o m m
T e l n e t C o m m
This command allows users to set maximum bandwidth limit number for the specified IP.
S y n t a x
S y n t a x
ip bandwidth on
ip bandwidth off
ip bandwidth default [tx_rate][rx_rate]
ip bandwidth status
ip bandwidth show
ip bandwidth [add/del] [IP1-IP2][tx][rx][shared]
482
D e s c r i p t i o n
D e s c r i p t i o n
Description
Turn on session limit for each IP.
Turn off session limit for each IP.
Set the default number of session num limit.
Set the default number of session num limit for p2p.
Display the current settings.
Display all session limit settings in the IP range.
Set when the IP session block works.
The unit is second.
Block/unblock the specified IP address.
Block: The IP cannot access Internet through the router.
Unblock: The specified IP can access Internet through the router.
Add the session limits in an IP range.
Delete the session limits in an IP range.
It means the range of IP address specified for this command.
It means the number of the session limits, e.g., 100.
It means the number of the session limits, e.g., 50 for P2P.
e
l e
a n d : i p b a n d w i d t
a n d : i p b a n d w i d t
h
h
Vigor3910 Series User's Guide