Draytek Vigor3910 Series User Manual page 493

S y n t a x
S y n t a x
Parameter
on
off
default [tx_rate][rx_rate]
status
show
add
del
IP1-IP2
tx
rx
shared
E x a m p l
E x a m p
> ip bandwidth default 200 800
> ip bandwidth add 192.168.1.50-192.168.1.100 10 60
> ip bandwidth status
IP range:
192.168.1.50 - 192.168.1.100 : Tx:10K Rx:60K
Current ip Bandwidth limit is turn off
Auto adjustment is off
T e l n e t C o m m
T e l n e t C o m m
This command allows users to set IP-MAC binding for LAN host.
S y n t a x
S y n t a x
ip bindmac on
ip bindmac off
ip bindmac strict_on
ip bindmac show
ip bindmac add [IP][MAC][Comment]
ip bindmac del [IP]/all
S y n t a x
S y n t a x
Parameter
on
off
Vigor3910 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
e
l e
a n d : i p b i n d m a c
a n d : i p b i n d m a c
D e s c r i p t i o n
D e s c r i p t i o n
Description
Turn on IP bandmac policy. Even the IP is not in the policy table, it
can still access into network.
Turn off all the bindmac policy.
Description
Turn on the IP bandwidth limit.
Turn off the IP bandwidth limit.
Set default tx and rx rate of bandwidth limit. The range is from 0 –
65535 Kpbs.
Display the current settings.
Display all the bandwidth limits settings within the IP range.
Add the bandwidth within the IP range.
Delete the bandwidth within the IP range.
It means the range of IP address specified for this command.
Set transmission rate for bandwidth limit.
Set receiving rate for bandwidth limit.
It means that the bandwidth will be shared for the IP range.
483