Draytek Vigor3910 Series User Manual page 179

Enable
User
Status
Click each index to edit one remote user profile. Each Dial-In Type requires you to fill the
different corresponding fields on the right. If the fields gray out, it means you may leave it
untouched. The following explanation will guide you to fill all the necessary fields.
Available settings are explained as follows:
Item
User account and
Authentication
Allowed Dial-In Type
Vigor3910 Series User's Guide
Check the box to activate such profile.
Display the username for the specific dial-in user of the
LAN-to-LAN profile. The symbol ??? represents that the
profile is empty.
Display the access state of the specific dial-in user.
Description
Enable this account - Select to enable this profile to be used
by remote dial-in users.
Idle Timeout - Allowed idle time before the router
disconnects the VPN connection. Default timeout value is
300 seconds.
Select all VPN protocols allowed for this profile.
For L2TP, specify how IPsec should be applied. Options are
None – IPsec cannot be used with L2TP connections.
Nice to Have – IPsec is preferred but not mandatory for

L2TP connections.
169