Draytek Vigor3910 Series User Manual page 68

Click any index (13~52) to get the following web page:
Available settings are explained as follows:
Item
Enable Channel 13~52
WAN Type
General Settings
Open WAN Interface for
this Channel
58
Description
Enable – Click it to enable the configuration of this channel.
Disable –Click it to disable the configuration of this channel.
The connections and interfaces created in every channel may
select a specific WAN type to be built upon. In the
Multi-VLAN application, only the Ethernet WAN type is
available. The user will be able to select the physical WAN
interface the channel shall use here.
VLAN Tag – Type the value as the VLAN ID number. Valid
settings are in the range from 1 to 4095. The network traffic
flowing on each channel will be identified by the system via
their VLAN Tags. Channels using the same WAN type may not
configure the same VLAN tag value.
Priority – Choose the number to determine the packet
priority for such VLAN. The range is from 0 to 7.
Check the box to enable relating function.
WAN Application –
Management – It can be specified for general

management (Web configuration/telnet/TR-069). If
you choose Management, the configuration for this
Vigor3910 Series User's Guide