Ii-2-2-1 Details Page For Pppoe In Etherenet Wan - Draytek Vigor3910 Series User Manual

I I - 2 - 2 - 1 D
I I - 2 - 2 - 1 D
To choose PPPoE as the accessing protocol of the Internet, please select PPPoE from the
WAN>>Internet Access >>WAN1 page. The following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
ISP Access Setup
PPPoE Pass-through
40
e t a i l s P a g e f o r P P P
e t a i l s P a g e f o r P P P
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
Username – Type in the username provided by ISP in this
field.
The maximum length of the user name you can set is 63
characters.
Password – Type in the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
More Options - It shows optional settings for configuration.

The router offers PPPoE dial-up connection. Besides, you
o E i n E t h e r e n e t W A
o E i n E t h e r e n e t W A
Service Name - Enter the description of the specific
network service.
N
N
Vigor3910 Series User's Guide