V-2-2 Bandwidth Limit - Draytek Vigor3910 Series User Manual

V - 2 - 2 B
V - 2 - 2 B
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default upstream
and downstream limit.
Available settings are explained as follows:
Item
Enable / Disable
Default Limit (Per User)
308
a n d w i d t h L i m i t
a n d w i d t h L i m i t
Description
Enable - Click this button to activate the function of limit
bandwidth.
 IP Routed Subnet – Check this box to apply the
bandwidth limit to the second subnet specified in
LAN>>General Setup. It is available for IPv4 settings
only.
Disable - Click this button to close the function of limit
bandwidth.
TX Limit - Define the default speed of the upstream for each
computer in LAN.
RX Limit - Define the default speed of the downstream for
Vigor3910 Series User's Guide