Draytek Vigor3910 Series User Manual page 501

Parameter
[<command><parameter>|...
]
-a <IP Address>
-d <DNS server mapping
index number>
-e <0/1>
-i <profile setting index
number>
-l
-n <domain name>
-p <profile name>
-r
E x a m p l
E x a m p
> ip dnsforward -i 1 -n ftp.drayTek.com
% Configure Set1's DomainName:ftp.drayTek.com
> ip dnsforward -i 1 -a 172.16.1.1
% Configure Set1's IP:172.16.1.1
> ip dnsforward -i 1 -l
% Idx: 1
% State: Disable
% Profile: test
% Domain Name: ftp.drayTek.com
% DNS Server IP: 172.16.1.1
>
T e l n e t C o m m
T e l n e t C o m m
This command allows users to set the IPv6 address for your router.
S y n t a x
S y n t a x
ip6 addr -s [prefix] [prefix-length] [LAN|WAN1|WAN2|iface#]
ip6 addr -d [prefix] [prefix-length] [LAN|WAN1|WAN2|iface#]
ip6 addr -a [LAN|WAN1|WAN2|iface#]
S y n t a x
S y n t a x
Parameter
-s
-d
-a
-u
prefix
prefix-length
LAN|WAN1|WAN2|iface#
Vigor3910 Series User's Guide
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
Set forwarded DNS server IP Address.
Delete the selected LAN DNS profile.
0: disable such function.
1: enable such function.
Type the index number of the profile.
List the content of LAN DNS profile (including domain name, IP
address and message).
Set domain name.
Set profile name for LAN DNS.
Reset the settings for selected profile.
e
l e
a n d : i p 6 a d d r
a n d : i p 6 a d d r
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to add a static ipv6 address.
It means to delete an ipv6 address.
It means to show current address(es) status.
It means to show only unicast addresses.
It means to type the prefix number of IPv6 address.
It means to type a fixed value as the length of the prefix.
It means to specify LAN or WAN interface for such address.
491