Clean The Phone Screen; Connect Your Phone To A Wi-Fi Network On Webex Calling (Formerly Spark Call) - Cisco IP Phone 7800 Series User Manual

Additional Information

Clean the Phone Screen

Procedure
If your phone screen gets dirty, wipe it with a soft, dry cloth.
Caution
Connect Your Phone to a Wi-Fi Network on Webex Calling
(formerly Spark Call)
With the Cisco IP Phone 8861 and 8865 phones, you can connect to the network using Wi-Fi.
The Cisco IP Phone 8865NR does not support Wi-Fi.
Note The phone PC port is disabled when Wi-Fi is enabled on your phone.
Before you begin
• Make sure you don't have a network cable connected to the network port of your phone before you turn
• In some configurations, your phone can get power over the network cable using Power over Ethernet
Procedure
Step 1 Press Applications
Step 2
Select Admin settings > Network setup > Wi-Fi client setup > Wireless > On and press Apply.
Step 3
Press Back
Step 4 Select Network name.
Step 5
Choose a network.
Step 6 Enter credentials for any fields that you see, such as your username, password, and passphrase.
Step 7
Click Connect.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Do not use any liquids or powders on the phone because they can contaminate the phone components
and cause failures.
on Wi-Fi.
(PoE). However, because you can't use a network cable with Wi-Fi, you must use a power adapter for
your phone.
.
and return to Wi-Fi client setup.

Clean the Phone Screen

Call)
175