Table of Contents
Advertisement
Site Preparation
Customer Responsibilities
This System Installation Guide provides instructions for a Keysight-trained
Application Engineer to install the Keysight PD1500A DPT System Rack and
Safety Enclosure.
Rack and Safety Enclosure Dimensions and Weight
Shipping Crate (with DPT Rack and
Safety Enclosure)
Rack and Safety Enclosure alone
(no test equipment installed)
Rack and Safety Enclosure
(all test equipment and fixtures
installed)
Tools Required for Installation:
- T30 Torx screwdriver to remove/attach test rack rear panels
- 3 mm L-shaped hex key wrench
- T25 L-shaped Torx key wrench
- T9 Torx screwdriver to attach Heater/Thermocouple assembly to DUT
- Large, 6 mm flat blade screwdriver to remove/attach test rack side panels
- Small flat blade screwdriver to attach N1294A GPIO-BNC adapter
- #2 PoziDrive screwdriver to install rack mounting kits
- Side cutters to remove cable ties
16
Receive the Double-Pulse Test System (multiple shipping containers). See
Ensure the operating environment (space, noise, etc.) is suitable. See
Electrical and environmental requirements are met. See
Provide a qualified electrician to do one of the following. See
•
permanently hard wire the free end to the AC power source
or
•
attach an IEC 60309 AC power plug (L+N+P 6h is recommended) to the AC power cable
(a matching IEC 60309 AC Power receptacle must also be installed). IEC 60309
connectors are not included with the PD1500A system.
Host Computer requirements.
Additional supplies (host computer, LAN cable, etc.) are not included.
page 18
page 18
Weight
Height
300 kg
167 cm
(660 lbs)
(65.75 in)
150kg
(330.7lbs)
160 cm
(63 in.)
162.5 kg
(358 lbs
}
for removing Work Surface. Your system
will have only one type of screw head.
Keysight Double-Pulse Test System Installation Guide
Customer Responsibilities
page 20
page 18
.
Depth
Width
92 cm
120 cm
(36.25 in)
(47.25 in)
70 cm
100 cm
(27.6 in.)
(39.4 in.)
Advertisement
Table of Contents
