Before Unpacking; Inspect For Damage - Keysight M9614A Startup Manual

Before Unpacking

Keysight M9614A/M9615A module is designed to meet IEC/EN61010-1 and must
only be installed in the PXIe chassis which is certified by a Nationally Recognized
Testing Laboratory. The PXIe chassis must already be installed on a static-safe
workbench so that you can install the module soon after unpacking.
Refer to the PXIe chassis manual for chassis installation and details.

Inspect for Damage

After unpacking a module, carefully inspect it for any shipping damage. Report
any damage to the shipping agent immediately, as such damage is not covered by
the warranty (see warranty information at the beginning of this document).
To avoid damage when handling a module, do not touch any exposed
components or connector pins.
Visit
Keysight equipment.
Keysight M9614A/M9615A Startup Guide, Edition 1
www.keysight.com/find/tips
Step 1: Unpack and Inspect the Module
for information on preventing damage to your
9