Introduction To Multi-Role Host - H3C S9500 Series Operation Manual

Routing switches
Hide thumbs Also See for S9500 Series:
Table of Contents

Advertisement

Operation Manual – MPLS
H3C S9500 Series Routing Switches
Therefore IETF raised two new OSPF VPN extension drafts, to provide a complete
solution to SPPF problems in BGP/MPLS VPN application when OSPF is used as
PE-CE routing protocol. In this case, PE router must be able to run multiple OSPF
instances, each of which corresponds to one VPN instance, owns an individual
interface, routing table, and sends VPN routing information over MPLS network using
BGP/OSPF interaction.
If supporting OSPF multi-instance, one router can run multiple OSPF processes, which
can be bound to different VPN instances. In practice, you can create one OSPF
instance for each service type. OSPF multi-instance can fully isolate different services
in transmission, which can solve security problems with low cost to meet the needs of
customers. Generally, OSPF multi-instance is run on PEs; The CE running OSPF
multi-instance in the LAN is called multi-VPN-instance CE. At present, isolation of LAN
services implements by VLAN function of the switch. OSPF Multi-VPN-Instance CE
provides schemes of services isolation implemented on routers.
VPN - RED
VPN - RED
VPN -RED
VPN -RED
Site1
Site1
Site1
Site1
OSPF Area0
OSPF Area0
OSPF Area0
OSPF Area0
Area 0
Area 0
OSPF 100 VPN
OSPF 100 VPN
OSPF 200 VPN GREEN
OSPF 200 VPN GREEN
Area 1
Area 1
VPN-GREEN
VPN-GREEN
VPN-GREEN
VPN-GREEN
Site1
Site1
Site1
Site1
OSPF Area1
OSPF Area1
OSPF Area1
OSPF Area1
Figure 3-6 OSPF multi-instance application in MPLS/BGP VPN PE
Figure 3-7 Multi-VPN-instance CE application in conventional LAN

3.1.6 Introduction to Multi-Role Host

The VPN attribute of the packets from a CE to its PE lies on the VPN bound with the
ingress interface. This, in fact determines that all the CEs forwarded by the PE through
OSPF Area2
OSPF Area2
CE11
CE11
-
-
RED
RED
MPLS VPN Backbone
MPLS VPN Backbone
MPLS VPN Bac kbone
MPLS VPN Bac kbone
-
-
PE1
PE1
CE12
CE12
ospf 100
ospf 100
vpn-engineering
vpn-engineering
opsf 200
opsf 200
vpn-rd
vpn-rd
ospf 300
ospf 300
PE
PE
vpn-finances
vpn-finances
Chapter 3 BGP/MPLS VPN Configuration
VPN - GREEN
VPN - GREEN
VPN-GREEN
VPN-GREEN
Site2
Site2
Site2
Site2
OSPF Area2
OSPF Area2
CE31
CE31
Area 2
Area 2
PE3
PE3
OSPF 100 VPN - GREEN
OSPF 100 VPN - GREEN
CE21
CE21
OSPF 100 VPN - RED
OSPF 100 VPN - RED
OSPF 200 VPN - GREEN
OSPF 200 VPN - GREEN
PE2
PE2
CE22
CE22
ospf 100
ospf 100
vpn-engineering
vpn-engineering
opsf 200
opsf 200
vpn-rd
vpn-rd
Multi-VPN-Instance CE
Multi-VPN-Instance CE
ospf 300
ospf 300
vpn-finances
vpn-finances
3-9
VPN - RED
VPN - RED
VPN-RED
VPN-RED
Site2
Site2
Site2
Site2
OSPF Area1
OSPF Area1
OSPF Area1
OSPF Area1
Area 0
Area 0
Area 1
Area 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9505S9508S9512

Table of Contents