H3C S9500 Series Operation Manual page 586

Operation Manual – MPLS
H3C S9500 Series Routing Switches
Table 3-32 Display VPN-instance related information
Display
information, including its RD, description,
the interfaces associated with it, and so on.
IV. Debugging information concerning processing BGP
Execute debugging command in user view for the debugging of the related
vpn-instance information.
Table 3-33 Enable the debugging for processing BGP
Enable the debugging for
processing BGP
Disable the debugging
V. Displaying MPLS L3VPN-LSP information
Table 3-34 Display MPLS L3VPN-LSP information
Display MPLS L3VPN
LSP information
Display MPLS L3VPN
LSP
information
VI. Displaying Sham-link
Table 3-35 Display Sham-link
Display Sham-link
Operation
the VPN-instance
Operation
debugging bgp { all | event | normal | { keepalive |
mp-update | open | packet | update | route-refresh |
update } [ receive | send |] [ verbose ] }
undo debugging bgp { {all | event | normal |
keepalive | mp-update | open | packet | update |
route-refresh } [ receive | send | verbose ] } { all |
event | normal | update }
Operation
display mpls l3vpn-lsp [ verbose] include text
display
vpn-instance-name ] [ transit | egress | ingress ]
VPN-instance
[include text | verbose ]
Operation
display ospf [ process-id ] sham-link
Chapter 3 BGP/MPLS VPN Configuration
related
display
[ vpn-instance-name | verbose ]
Command
Command
mpls l3vpn-lsp
Command
3-26
Command
ip vpn-instance
vpn-instance
[