Configuring The Msdp Connection Retry Period; Shutting Msdp Peers Down; Clearing Msdp Connections, Statistics And Sa Caching Configuration - H3C S9500 Series Operation Manual

Operation Manual – Multicast Protocol
H3C S9500 Series Routing Switches
Table 8-13 Configuring MSDP full connection group
Configure an MSDP peer to be a
member of an MSDP Mesh Group
Delete that member from the Group
If an MSDP peer is configured into different mesh groups, only the last configuration is
valid.

8.2.12 Configuring the MSDP Connection Retry Period

Perform the following configurations in MSDP view.
Table 8-14 Configuring the MSDP connection retry period
Configuring the MSDP connection retry period
Restore the default value of MSDP connection retry interval
By default, MSDP connection is retried at the interval of 30 seconds.

8.2.13 Shutting MSDP Peers Down

The session between MSDP peers can be cut off and re-activated as needed.
If a session between MSDP peers is cut off, the TCP connection will terminate with no
retry effort, but the configuration information will be reserved.
Please perform the following configurations in MSDP view.
Table 8-15 Shutting MSDP peers down
Shut a specified MSDP peer down
Turn the MSDP peer up
By default, MSDP peer is enabled.

8.2.14 Clearing MSDP Connections, Statistics and SA Caching Configuration

Perform the following configurations in user view.
Operation
Operation
Operation
8-11
Chapter 8 MSDP Configuration
Command
peer peer-address mesh-group name
undo peer peer-address mesh-group
name
timer retry seconds
undo timer retry
Command
shutdown peer-address
undo shutdown peer-address
Command