Enabling/Disabling Ftp Server - H3C S9500 Series Operation Manual

Routing switches
Hide thumbs Also See for S9500 Series:
Table of Contents

Advertisement

Operation Manual – System Management
H3C S9500 Series Routing Switches
Table 1-10 Configuration of the switch as FTP client
Device
Switch
PC
Table 1-11 lists the configuration of the switching as FTP server.
Table 1-11 Configuration of the switch as FTP server
Device
Switch
PC
Caution:
The prerequisite for normal FTP function is that the switch and PC are reachable.

1.3.2 Enabling/Disabling FTP Server

You can use the following commands to enable/disable the FTP server on the switch.
Perform the following configuration in system view.
Configuration
Log into the remote FTP
server directly with the ftp
command.
Start FTP server and make
such settings as username,
password, and authority.
Configuration
Start FTP server.
Configure authentication
and
authorization
FTP server.
Configure
running
parameters
for
FTP
server.
Log into the switch from
FTP client.
Chapter 1 File System Management
Default
You need first get FTP user
command and password, and
-
then log into the remote FTP
server. Then you can get the
directory and file authority.
-
-
Default
You can view the configuration
FTP server
information of FTP server with
is disabled
the
command
Configure username, password
for
-
and authorized directory for
FTP users
Configure timeout time value for
-
FTP server.
-
-
1-8
Description
Description
display
ftp-server

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9505S9508S9512

Table of Contents