H3C S9500 Series Operation Manual page 132

Operation Manual – VLAN-QinQ
H3C S9500 Series Routing Switches
4.2.1 Configuring an isolate-user-VLAN
Table 4-2 Configure an isolate-user-VLAN
Operation
Enter system view
Create a VLAN
Configure
VLAN
isolate-user-VLAN
Add ports to the
isolate-user-VLAN
4.2.2 Configuring a Secondary VLAN
Table 4-3 Configure a Secondary VLAN
Operation
Enter system view
Create a VLAN as a
Secondary VLAN
Add ports to the
Secondary VLAN
Command
system-view
vlan vlan-id
the
isolate-user-vlan
as an
enable
port interface-list
Command
system-view
vlan vlan-id
port interface-list
Chapter 4 Isolate-user-VLAN Configuration
-
Required
Required
You cannot configure VLAN 1 as an
isolate-user-VLAN
Optional
An isolate-user-VLAN
multiple ports, including upstream ports
connecting to other switches. However
the contained ports can only be access
or hybrid ports, not trunk ports.
-
Required
You cannot configure VLAN 1 as a
Secondary VLAN.
Optional
You can add multiple ports (not uplink
ports) to a Secondary VLAN.
4-2
Description
can contain
Description