Adding/Deleting An Entry To/From The Statistics Table; Displaying And Debugging Rmon - H3C S9500 Series Operation Manual

Operation Manual – System Management
H3C S9500 Series Routing Switches
You can use the following commands to add/delete an entry to/from the history control
table.
Perform the following configuration in Ethernet port view.
Table 6-6 Add/delete an entry to/from the history control table
Add an entry to the history
control table.
Delete an entry from the
history control table.
History control entry calculates various data at the sampling time interval. You can use
the display rmon history command to view the information of the history control entry.

6.2.5 Adding/Deleting an Entry to/from the Statistics Table

The RMON statistics management concerns the port usage monitoring and error
statistics when using the ports. The statistics include collision, CRC and queuing,
undersize packets or oversize packets, timeout transmission, fragments, broadcast,
multicast and unicast messages and the usage ratio of bandwidth.
You can use the following commands to add/delete an entry to/from the statistics table.
Perform the following configuration in Ethernet port view.
Table 6-7 Add/delete an entry to/from the statistics table
Add an entry to the statistics table
Delete an entry from the statistics table
Statistics entry calculates the accumulated information starting from the time defined by
an event. You can use the display rmon history command to view the information of
the statistics entry.

6.3 Displaying and Debugging RMON

After the above configuration, execute the display command in any view to display the
running of the RMON configuration, and to verify the effect of the configuration.
Operation
Operation
Command
rmon history entry-number buckets number
interval sampling-interval [ owner text-string ]
undo rmon history entry-number
rmon statistics entry-number [ owner
text-string ]
undo rmon statistics entry-number
6-5
Chapter 6 RMON Configuration
Command