H3C S9500 Series Operation Manual page 654

Operation Manual – MPLS
H3C S9500 Series Routing Switches
# Configure a static LSP, with the in-label of 101 and the ingress interface being the
interface of VLAN 212.
[H3C-mpls] static-lsp egress PEA-PEB l2vpn incoming-interface vlan-interface
212 in-label 101
# Configure the remote connection.
[H3C] ccc remote-connection interface vlan-interface 211 transmit-lsp PEB-PEA
receive-lsp PEA-PEB
3) Configure P.
[H3C] mpls lsr-id 10.0.0.2
[H3C] mpls
[H3C] vlan 211
[H3C-vlan211] port gigabitethernet 2/1/1
[H3C-vlan211] quit
[H3C] interface Vlan-interface 211
[H3C-Vlan-interface211] ip address 5.5.5.2 24
[H3C-Vlan-interface211] mpls
[H3C] vlan 212
[H3C-vlan212] port gigabitethernet 2/1/2
[H3C-vlan212] quit
[H3C] interface Vlan-interface 212
[H3C-Vlan-interface212] ip address 6.6.6.2 24
[H3C-Vlan-interface212] mpls
# Configure a static LSP, with the in-label of 100, the ingress interface being the
interface of VLAN 211, the out-label of 101, and the egress interface being the interface
of VLAN 212.
[H3C-mpls] static-lsp transit PEA-PEB l2vpn incoming-interface vlan-interface
211 in-label 100 nexthop 6.6.6.1 vlan-interface 212 out-label 101
# Configure a static LSP, with the in-label of 200, the ingress interface being the
interface of VLAN 212, the out-label of 211, and the egress interface being the interface
of VLAN 211.
[H3C-mpls] static-lsp transit PEB-PEA l2vpn incoming-interface vlan-interface
212 in-label 200 nexthop 5.5.5.1 out-label 211
4-9
Chapter 4 MPLS L2VPN