H3C S9500 Series Operation Manual page 184

Operation Manual – Network Protocol
H3C S9500 Series Routing Switches
m-node: Nodes of this type are p nodes which take some broadcast features. (m
stands for mixed.)
h-node: Nodes of this type are b nodes which take peer-to-peer mechanism. (h
stands for hybrid.)
I. Configuring NetBIOS node type for a global DHCP address pool
Perform the following configuration in DHCP address pool view.
Table 4-22 Configure a NetBIOS node type for a global DHCP address pool
Configure the NetBIOS node type for a
global DHCP address pool
Cancel the NetBIOS node type configuration
for a global DHCP address pool
II. Configuring NetBIOS node type for current VLAN interface
Perform the following configuration in VLAN interface view.
Table 4-23 Configure a NetBIOS node type for current VLAN interface
Configure the NetBIOS node type for
DHCP clients of the current VLAN
interface DHCP address pool
Remove NetBIOS node type configured
for DHCP clients of the current VLAN
interface DHCP address pool
III. Configuring NetBIOS node type for multiple VLAN interfaces
Perform the following configuration in system view.
Table 4-24 Configure a NetBIOS node type for multiple VLAN interfaces
Configure NetBIOS node types for
DHCP clients of multiple VLAN interface
DHCP address pools
Remove
configurations
interface DHCP address pools
Operation
Operation
Operation
NetBIOS node
of multiple VLAN
4-16
Chapter 4 DHCP Configuration
netbios-type { b-node | h-node |
m-node | p-node }
undo netbios-type
Command
dhcp server netbios-type { b-node |
h-node | m-node | p-node }
undo dhcp server netbios-type
Command
dhcp server netbios-type { b-node |
h-node | m-node | p-node } { interface
vlan-interface
vlan-interface vlan-id ] | all }
type undo dhcp
{ interface vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }
Command
vlan-id [ to
server netbios-type