H3C S9500 Series Operation Manual page 104

Operation Manual – Port
H3C S9500 Series Routing Switches
6.5 Displaying IDS Linkage Configuration
Execute the display command in any view to display IDS linkage configuration.
Table 6-2 Display IDS linkage configuration
Configuration
Enable
debugging
Display
configuration information
IDS linkage
debugging ids-acl
display
controlled-interface
IDS linkage
name
ip-addr
ip-addr }
Chapter 6 IDS Linkage Configuration
Command
ids { all |
|
name | source
| destination
6-5
Description
By default, IDS linkage
debugging is disabled.
You can execute the
display ids command in
any view.