Operation Manual – VLAN-QinQ
H3C S9500 Series Routing Switches
# Enable GVRP globally.
[H3C] gvrp
# Set Ethernet3/1/1 as a Trunk port and allows all the VLANs to pass through.
[H3C] interface ethernet3/1/1
[H3C-Ethernet3/1/1] port link-type trunk
[H3C-Ethernet3/1/1] port trunk permit vlan all
# Enable GVRP on the Trunk port.
[H3C-Ethernet3/1/1] gvrp
Configure Switch B:
# Enable GVRP globally.
[H3C] gvrp
# Set Ethernet4/1/1 as a Trunk port and allows all the VLANs to pass through.
[H3C] interface ethernet4/1/1
[H3C-Ethernet4/1/1] port link-type trunk
[H3C-Ethernet4/1/1] port trunk permit vlan all
# Enable GVRP on the Trunk port.
[H3C-Ethernet4/1/1] gvrp
Chapter 2 GARP/GVRP Configuration
2-7