H3C S9500 Series Operation Manual page 382

Operation Manual – Multicast Protocol
H3C S9500 Series Routing Switches
Note:
A port can only belong to one multicast VLAN.
The type of the ports connected to user terminals must be hybrid untagged.
The current system supports up to three multicast VLANS.
3.3 Multicast VLAN Configuration Example
I. Network requirements
Configure a multicast VLAN, so that users in VLAN 2 and VLAN 3 receive multicast
flows through the multicast VLAN10.
Table 3-2 Device number and description
Device
Switch A
Switch B
PC 1
PC 2
Description
The IP address of VLAN 2 interface is 168.10.1.1.
The port E1/1/1 belongs to VLAN 2 and is connected
to the Workstation
The IP address of VLAN 10 interface is 168.20.1.1.
Layer 3 switch
The port E1/1/10 belongs to VLAN 10 and is
connected to Switch B
Configure layer 3 multicast PIM DM and IGMP on
VLAN 10
VLAN 2 contains the port E1/1/1 and VLAN 3
contains the port E1/1/2. The ports E1/1/1 and
Layer 2 switch
E1/1/2 are connected to PC1 and PC2 respectively.
The port E1/1/10 is connected to Switch A.
User 1 PC1 is connected to the port E1/1/1 of Switch B.
User 2 PC2 is connected to the port E1/1/2 of Switch B.
3-2
Chapter 3 Multicast VLAN Configuration
Requirement