H3C S9500 Series Operation Manual page 921

Operation Manual – System Management
H3C S9500 Series Routing Switches
Table 8-9 Enter the public key edit view
Enter the public key edit view
IX. Exiting the public key edit view
Use this configuration task to return from the public key edit view to the public key view
and save the input public key. Before saving the input public key, the system will check
the validity of the key:
If the public key string contains any illegal character, the configured key is invalid;
If the configured key is valid, it will be saved to the public key list.
Perform the following configuration in public key edit view.
Table 8-10 Exit the public key edit view
Exit the public key edit view
X. Specifying the public key for an SSH user
Use this configuration task to specify an existing public key for an SSH user.
Perform the following configuration in system view.
Table 8-11 Specify the public key for an SSH user
Specify the public key for an SSH user
Cancel the corresponding relationship
between the user and the public key
XI. Configuring the server compatibility mode
Use this configuration task to set whether the server should be compatible with the SSH
1.x client.
Perform the following configuration in system view.
Operation
Operation
Operation
8-9
Chapter 8 SSH Terminal Service
Command
public-key-code begin
Command
public-key-code end
Command
ssh user username assign rsa-key
keyname
undo ssh user username assign
rsa-key