H3C S9500 Series Operation Manual page 105

Operation Manual – Port
H3C S9500 Series Routing Switches
Chapter 7 Port Isolation Configuration
7.1 Port Isolation Overview
Using port isolation feature, you can place different user ports into the same VLAN. As
these users cannot communicate with each other, the network security is improved,
flexible networking scheme is provided, and a lot of VLAN sources are saved.
7.2 Configuration Tasks
Table 7-1 Configuration tasks
Configuration tasks
Configure an isolated group
Configure an upstream port
for an isolated group
Configure isolated ports for
an isolated group
7.2.1 Configuring an Isolated Group
Table 7-2 Configuring an isolated group
Operation
Enter system view
Configure
isolated group
Query
information
Required
Required
Required
Command
system-view
an port-isolate
isolate-group-id
display
isolation
group [ isolate-group-id ]
[ verbose ]
Chapter 7 Port Isolation Configuration
Description
Refer to section 7.2.1
Refer to section 7.2.2
Refer to section 7.2.3
-
Required
Ports in the isolated group can
only communicate with the
group
upstream
where the upstream port of the
isolated group is located must
contain all the ports in this
isolated group
port-isolate
You
command in any view
7-1
Detailed configuration
Description
port. The
can carry out
VLAN
this