H3C S9500 Series Operation Manual page 877

Routing switches

Hide thumbs Also See for S9500 Series:

Table of Contents

Operation Manual – System Management

H3C S9500 Series Routing Switches

Figure 5-1 Architecture of the MIB tree

The MIB (Management Information Base) is used to describe the hierarchical

architecture of the tree and it is the set defined by the standard variables of the

monitored network device. In the above figure, the managed object B can be uniquely

specified by a string of numbers {1.2.1.1}. The number string is the Object Identifier of

the managed object.

The current SNMP Agent of Ethernet switch supports SNMP V1, V2C and V3. The

MIBs supported are listed in the following table.

Table 5-1 MIBs supported by the Ethernet Switch

MIB attribute

MIB II based on TCP/IP network

Ethernet MIB

Chapter 5 SNMP Configuration

Chapters

Table of Contents

S9505 S9508 S9512