Displaying And Debugging Device Management; Device Management Configuration Example; Using The Switch As An Ftp Client To Implement The Remote Upgrade (S9505 As Example) - H3C S9500 Series Operation Manual

Operation Manual – System Management
H3C S9500 Series Routing Switches

3.3 Displaying and Debugging Device Management

After the above configuration, execute display command in any view to display the
running of the device management configuration, and to verify the effect of the
configuration.
Table 3-8 Display and Debug device management
Display the module types and running states
of each card.
Display the application deployed on next
startup
Display the running state of the built-in fans.
Display the Used status of switch memory
Display the state of the power.
Display CPU occupancy

3.4 Device Management Configuration Example

3.4.1 Using the Switch as an FTP Client to Implement the Remote Upgrade
(S9505 as example)
I. Network requirements
The user logs into the switch using Telnet, downloads the application from the FTP
server to the flash memory of the switch, and implements remote upgrade using the
right commands.
The switch serves as an FTP client and the remote PC as an FTP server. The
configuration on the FTP server is as follows: an FTP user is configured with the name
switch, the password hello and the read & write authority over the Switch root directory
on the PC. The IP address of a VLAN interface on the switch is 1.1.1.1, and the IP
address of the PC is 2.2.2.2. The switch and PC are reachable with each other.
The switch applications switch.app and boot.app are stored on the PC. Using FTP,
these files can be downloaded from the remote FTP server to the switch.
Operation
3-5
Chapter 3 Device management
Command
display device [ detail | [ shelf
shelf-no ] [ frame frame-no ] [ slot
slot-no ] ]
display boot-loader
display fan [ fan-id ]
display memory [ slot slot-no ]
display power [ power-ID ]
display cpu [slot slot-no ]