H3C S9500 Series Operation Manual page 97

Operation Manual – Port
H3C S9500 Series Routing Switches
Configuration steps
Display integrated ring
selection
information
Display
configurable
timer values
Display
information
Query
statistics information of
packets
nodes on the ring to
the local node or from
the local node to other
nodes
Note that the bridge MAC addresses of the nodes in the ring cannot be the same.
5.2.3 Configuration Example
I. Network requirements
Use a pair of optic fiber cables to connect the RPR ports of Node A, Node B, Node C
and Node D. The physical port 0 connects the physical port 1.
II. Network diagram
Figure 5-1 Network diagram for RPR port configuration
display
[overall | static | dynamic |
table
vrrp]
[ interface-number ] ]
all
display rpr timers [ rprpos
RPR
[ interface-number ]
display rpr topology { all |
topology
ring | local | stations }
[verbose]
the traffic
display
from other
{ dmac | smac } [mac
address]
[ interface-number ] ]
Chapter 5 RPR Port Configuration
Command
rpr rs-table
[ rprpos
rpr statistics
[ rpr
5-5
Description
Optional. Without
parameter, the command
displays the integrated ring
selection table of all RPR
rings.
Optional.
Optional. If you do not
specify a port,
command displays
topology information about
all RPR ports.
Optional
any
the
the