Product Overview; Introduction To The Lsqm1Wcmb0; Physical Properties Of The Lsqm1Wcmb0; Technical Specifications - H3C WIRELESSACCESSCOTROLLER S7500E Installation Manual

Access controller module

Hide thumbs Also See for WIRELESSACCESSCOTROLLER S7500E:

Table of Contents

The models listed in this manual are not applicable to all regions. Please consult the local agents for the

models applicable to your region.

Product Overview

The LSQM1WCMB0 is an access controller module for the H3C S7502E/S7503E/S7506E/S7506E-V/

S7510E Ethernet switches. It is powered by the power supply of the switch in which it is installed and

establishes a 10 Gbps communication channel with the switch through an internal interface to

implement the wireless access control functionality. The LSQM1WCMB0 access controller module can

start working as soon as it is installed into a slot of a switch.

Figure 1-1 Appearance of the LSQM1WCMB0

The LSQM1WCMB0 provides the wireless access control functionality.

From left to right, the access controller module provides two USB interfaces, one 10/100/1000Base-T

management Ethernet interface, two status LEDs (LINK and ACT) for the management Ethernet

interface, and one console port.

Table 1-1 Technical specifications for the LSQM1WCMB0

CPU type

CPU frequency

Boot ROM size

Item

BCM1125H

600 MHz

512 KB

1-1

Specification

Table of Contents

Lsqm1wcmb0