H3C S9500 Series Operation Manual page 475

Operation Manual – QoS/ACL
H3C S9500 Series Routing Switches
Table 1-3 ACL configuration tasks interface cards
Enter system view
Configure
range
Define a flow template
Enter ACL view
Define a rule
Exit ACL view
Enter
view
Apply a defined flow
template in Ethernet
port view
Activate the ACL
The following table describes the configuration tasks for service processor cards.
Table 1-4 ACL configuration tasks for service processor cards
Enter system view
Configure the time range
Item
system-view
time-range time-name { start-time to
end-time days-of-the-week [ from
the time start-time start-date ] [ to end-time
end-date ] | from start-time start-date
[ to end-time end-date ] | to end-time
end-date }
flow-template
slotid template-info
acl { number acl-number | name
acl-name [ advanced | basic | link |
user ] } [ match-order { config |
auto } ]
rule
quit
Ethernet port interface
interface-number
flow-template user-defined
packet-filter inbound
Item
system-view
time-range time-name { start-time
to
[ from start-time start-date ] [ to
end-time
start-time start-date [ to end-time
end-date ] | to end-time end-date }
Command
user-defined
interface-type
Command
end-time days-of-the-week
end-date ] |
1-4
Chapter 1 ACL Configuration
Description
-
Optional
slot
Optional
Required
Required
-
The value
interface-type
can only
Ethernet
type.
Optional.
can perform this
operation
when a
template
been previously
defined.
Required
Description
-
Optional
from
of
be
port
You
only
flow
has