Configuring Self-Service - H3C XE 200 User Manual

User Manual
H3C XE 200/2000 IP PBX G-Remote
By default, there are ten files in the flash:/web directory on the XE IP PBX: index.html,
zh_down.html,
zh_down.png, en.png, zh.png, and zh_describe.png.
Note:
The above mentioned xxx.xxx.xxx.xxx represents the IP address of the XE IP PBX,
and filename refers to the name of the file saved under the flash:/web directory on
the XE IP PBX.
After you modify or delete a file under the flash:/web directory, restart the Web
server so that your change can take effect. However, adding a file does not need the
restart-up.
Be careful to rename or delete files under the flash:/web directory. Improper
operations may cause failure of downloading GUI client software.
Click [XE G-Remote English Version] on the [XE G-Remote Download] Web page to
download the GUI client software.
Enable or disable the Web service as follows:
Table 2-4 Enable/disable the Web service
Enter system view
Enter GUI server configuration view
Enable/disable the Web service

2.2.5 Configuring Self-service

With the self-service, a user can log on to the GUI server with the normal user account
and perform the following operations on one's own account:
Querying account configurations.
Configuring services.
Changing the password.
A normal user can configure/query the following services on the GUI server:
Abbreviated dialing. Refer to
Call forwarding services. Refer to
details.
MyRing service. Refer to
Do-not-disturb service. Refer to
Alarm clock service. Refer to
en_down.html, g-remote_ch.exe,
Operation
Abbreviated Dialing Service
MyRing Service
Alarm Clock Service
2-3
Chapter 2 GUI Server Configuration
g-remote_en.exe,
Command
system-view
gui
web { start | stop }
Call Forwarding Services
for configuration details.
Do-Not-Disturb Service
for configuration details.
banner.jpg,
Remarks
—
—
Required
for configuration details.
for configuration
for configuration details.