Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual page 1331

Discontinued Discontinued commands are commands that were used by previous oscilloscopes,
Commands but are not supported by the InfiniiVision 4000 X-Series oscilloscopes. Listed
below are the Discontinued commands and the nearest equivalent command
available (if any).
Discontinued Command
ASTore
CHANnel:MATH
CHANnel<n>:PROTect
DISPlay:INVerse
DISPlay:COLumn
DISPlay:FREeze
DISPlay:GRID
DISPLay:LINE
DISPlay:PIXel
DISPlay:POSition
DISPlay:ROW
DISPlay:TEXT
FUNCtion:MOVE
FUNCtion:PEAKs
HARDcopy:ADDRess
MASK
:POWer:SIGNals:CYCLes
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Obsolete and Discontinued Commands
Current Command Equivalent
:DISPlay:PERSistence INFinite
(see page 375)
:FUNCtion:OPERation (see
page 416)
:CHANnel<n>:PROTection (see
page 319)
none
none
none
none
none
none
none
none
none
none
none
none
none
:POWer:SIGNals:CYCLes:HARM
onics (see page 682)
:POWer:SIGNals:CYCLes:QUALi
ty (see page 683)
Comments
ADD not included
Previous form of this command
was used to enable/disable
50Ω protection. The new
command resets a tripped
protect and the query returns
the status of TRIPed or
NORMal.
Only parallel printer port is
supported. GPIB printing not
supported
All commands discontinued,
feature not available
This command was separated
into several other commands
for specific types of power
analysis.
37
1331