Keysight Technologies InfiniiVision MSO-X 4022A Programmer's Manual page 4

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
Chapter 10, ":CHANnel<n> Commands," starting on page 301, describes
commands that control all oscilloscope functions associated with individual
analog channels or groups of channels.
Chapter 11, ":COMPliance Commands," starting on page 325, describes
commands that control the optional DSOX4USBSQ USB 2.0 signal quality
analysis feature.
Chapter 12, ":COUNter Commands," starting on page 337, describes
commands that control the optional DSOXDVMCTR counter analysis feature.
Chapter 13, ":DEMO Commands," starting on page 343, describes commands
that control the education kit (Option EDU) demonstration signals that can be
output on the oscilloscope's Demo 1 and Demo 2 terminals.
Chapter 14, ":DIGital<d> Commands," starting on page 351, describes
commands that control all oscilloscope functions associated with individual
digital channels.
Chapter 15, ":DISPlay Commands," starting on page 359, describes commands
that control how waveforms, graticule, and text are displayed and written on
the screen.
Chapter 16, ":DVM Commands," starting on page 377, describes commands
that control the optional DSOXDVM digital voltmeter analysis feature.
Chapter 17, ":EXTernal Trigger Commands," starting on page 383, describes
commands that control the input characteristics of the external trigger input.
Chapter 18, ":FUNCtion<m> Commands," starting on page 389, describes
commands that control math waveforms.
Chapter 19, ":HARDcopy Commands," starting on page 429, describes
commands that set and query the selection of hardcopy device and formatting
options.
Chapter 20, ":LISTer Commands," starting on page 447, describes commands
that turn on/off the Lister display for decoded serial data and get the Lister
data.
Chapter 21, ":MARKer Commands," starting on page 451, describes commands
that set and query the settings of X-axis markers (X1 and X2 cursors) and the
Y-axis markers (Y1 and Y2 cursors).
Chapter 22, ":MEASure Commands," starting on page 473, describes
commands that select automatic measurements (and control markers).
Chapter 23, ":MEASure Power Commands," starting on page 555, describes
measurement commands that are available when the DSOX4PWR power
measurements and analysis application is licensed and enabled.
Chapter 24, ":MTESt Commands," starting on page 579, describes commands
that control the mask test features provided with Option LMT.
Chapter 25, ":POD Commands," starting on page 613, describes commands
that control all oscilloscope functions associated with groups of digital
channels.
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide