How To Work In The Menu; Normal Mode; Menu Mode; Changing The Plotter Mode - MUTOH DrafStation User Manual

Be sure to read and understand the safety warnings before handling the printer.

6.1 HOW TO WORK IN THE MENU

This section explains the mode of the plotter and how to change it.

6.1.1 Normal mode

The plotter is ready to plot.
• The media has been loaded and the media type has been set.
•
Various functions for printing will be performed on the operation panel.
•
The message 'Ready to plot' is shown.

6.1.2 Menu mode

In this mode, various setup items (IP address, HPGL settings, pen setup, etc...) will be set on the operation
panel.
Notes
•
Essential settings for normal printing can be modified/set on the plotter driver or the graphics
application software, or via the operation panel.

6.1.3 Changing the plotter mode

(1) Changing from Normal mode to Menu mode.
Action: Press the [Menu] key on the operation panel.
Result: The display is in 'Menu' mode', from now on called the 'Setting Menu display'.
The following message is shown: "*Menu* TestPlot>".
User's Guide DrafStation and Drafstation Pro
114
Chapter 6: Printer menu
AP-75730, Rev. 2.1, 19/01/2009